+31 (0)487 20 30 00

Standalone Gateways

ProSoft Technology Standalone gateways

Artikelen 1 tot 10 van 53 in totaal

per pagina

Pagina:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Modbus Plus to PROFIBUS DP Master V1

    5304-MBP-PDPMV1

    The ProLinx Modbus Plus to PROFIBUS DPV1 Master Gateway creates a powerful connection between devices on a Modbus Plus network and a PROFIBUS slave device. This stand-alone DIN-rail mounted protocol gateway provides one Modbus Plus configurable DB9F port and one PROFIBUS DPV1 Master configurable DB9F port.

    The Modbus Plus protocol driver supports both Master and Slave implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable.

    The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.

    Meer info
    € 2.310,00

    Availability: Please contact

  • Modbus Plus to PROFIBUS DP Slave

    5305-MBP-PDPS

    The ProLinx Modbus Plus to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a Modbus Plus network and a PROFIBUS master device. This stand-alone DIN-rail mounted protocol gateway provides one Modbus Plus configurable DB9F port and PROFIBUS DP Slave configurable DB9F port.

    The Modbus Plus protocol driver supports both Master and Slave implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable.

    The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.

    Meer info
    € 1.712,00

    Availability: Please contact

  • DNP 3.0 Master to DF1 Master/Slave (3 ports)

    5102-DNPM-DFCM3

    The ProLinx DNP 3.0 Master to DF1 Master/Slave Gateway creates a powerful connection between devices on a DF1 network and a DNP Slave device. This stand-alone DIN-rail mounted protocol gateway provides one DNP configurable serial port and three DF1 Master/Slave configurable serial ports.

    The DNP 3.0 Master protocol driver supports Master implementations of the protocol on one port. This port is fully configurable.

    The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable.

    Meer info
    € 1.528,00

    Availability: Please contact

  • DNP 3.0 Master to Modbus Master/Slave 3 Ports

    5102-DNPM-MCM3

    The ProLinx DNP 3.0 Master to Modbus Master/Slave Gateway creates a powerful connection between devices on a DNP network and Modbus devices. This stand-alone DIN-rail mounted protocol gateway provides up to four serial ports.

    The DNP 3.0 Master protocol driver supports Master implementations of the protocol on one port. This port is fully configurable.

    The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution.

    Meer info
    € 1.528,00

    Availability: Please contact

  • DNP 3.0 Slave to DF1 Master/Slave 3 ports

    5102-DNPS-DFCM3

    The ProLinx DNP 3.0 Slave to DF1 Master/Slave Gateway creates a powerful connection between devices on a DNP network and DF1 devices. This stand-alone DIN-rail mounted protocol gateway provides one DNP Slave serial port and three DF1 serial ports individually configurable as either Master or Slave.

    The DNP 3.0 Slave protocol driver supports Slave implementations of the protocol on one port. This port is fully configurable.

    The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable.

    Meer info
    € 1.528,00

    Availability: Please contact

  • DNP 3.0 Slave to Modbus Master/Slave 3 ports

    5102-DNPS-MCM3

    The ProLinx DNP 3.0 Slave to Modbus Master/Slave Gateway creates a powerful connection between devices on a Modbus network and a DNP master device. This stand-alone DIN-rail mounted protocol gateway provides one DNP 3.0 Slave configurable serial port, and three Modbus Master or Slave configurable serial ports.

    The DNP 3.0 Slave protocol driver supports Slave implementations of the protocol on one port. This port is fully configurable.

    The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution.

    Meer info
    € 1.528,00

    Availability: Please contact

  • DNP 3.0 Master to PROFIBUS DP Slave

    5105-DNPM-PDPS

    The ProLinx DNP 3.0 Master to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a DNP 3.0 network and PROFIBUS DP master devices. This stand-alone DINrail mounted protocol gateway provides one serial port and PROFIBUS DB Slave port.

    The DNP 3.0 Master protocol driver supports Master implementations of the protocol on one port. This port is fully configurable.

    The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.

    Meer info
    € 1.528,00

    Availability: Please contact

  • DNP 3.0 Slave to PROFIBUS DP Slave

    5105-DNPS-PDPS

    The ProLinx DNP Slave to PROFIBUS DP Slave Gateway creates a powerful connection between DNP and PROFIBUS master devices. This stand-alone DINrail mounted protocol gateway provides one serial port and one PROFIBUS Slave port.

    The DNP 3.0 Slave protocol driver supports Slave implementations of the protocol on one port. This port is fully configurable.

    The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.

    Meer info
    € 1.528,00

    Availability: Please contact

  • DNP 3.0 Ethernet to Modbus Master/Slave

    5201-DNPSNET-MCM

    The ProLinx DNPSNET to Modbus Master/Slave Gateway creates a powerful connection between devices on a DNP Ethernet network and Modbus devices. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and up to four serial ports.

    The ProLinx module supports the DNP 3.0 protocol as a server using the TCP and UDP protocols using service port 20000. This port is fully configurable.

    The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution.

    Meer info
    € 1.367,00

    Availability: Please contact

  • IEC 60870-5-104 Server to DF1 Master Slave

    5201-104S-DFCM

    The ProLinx family IEC60870-5-104 Server to DF1 Master/Slave communications module (5201-104S-DFCM) creates a powerful connection between devices on an IEC 104 network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and up to four serial ports.

    The 104S module accepts commands from an attached master unit on the network and generates unsolicited messages.

    The DF1 (DFCM) protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable, providing a great deal of flexibility.

    Meer info
    € 1.367,00

    Availability: Please contact

Artikelen 1 tot 10 van 53 in totaal

per pagina

Pagina:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5